"Your Compressed Gas Equipment Specialists" 1-800-537-3090
Select Page

Amico Multiple Zone Valve Box with Sensor


General Specifications:
Zone valve boxes shall be an Amico Alert-1 series.

Each recessed zone valve box shall consist of the following components: A steel valve box which can house one to seven shut-off ball valves with tube extensions, an aluminum frame, and a pull-out removable opaque window. Gauges are optional. The terminal strips are provided with the box. The sensors and DISS fi ttings are provided with the alarm.

The valve box shall be constructed of 18 gauge steel complete with a baked white enamel fi nish. Affi xed to the opposing sides of the box will be two adjustable steel brackets for the purpose of mounting the box to the structural support. The steel brackets shall accommodate various finished wall thicknesses between 3/8” [9.5 mm] and 1-3/16” [30 mm] and shall be fi eld adjustable.

The frame assembly shall be constructed of anodized aluminum and shall be mounted to the back box assembly by standard number 6, 3/8” tapping screws as provided. The removable front shall consist of an opaque window with a pull-out ring pre-mounted to the centre of the window.


Request a Quote specs-pdf


Access to the zone shut-off valves shall be by merely pulling the ring assembly to remove the window from the frame. The window can be reinstalled without the use of tools only after the valve handles have been returned to the open position.

The window shall be marked to prohibit unauthorized persons from tampering with the valves with the following silk-screen caution:

The valve shall be 3 piece ball-type design with a bronze body and a chrome plated brass ball. Seats shall be Tefl on (TFE) and seals Viton. A blow-out proof stem shall be used and the valve shall have a maximum pressure rating of 600 psi [4,137 kPa].

Valves shall be operated by a lever-type handle requiring only a quarter turn from a fully open position to a fully closed position.

All valves shall be equipped with type “K” washed and degreased copper pipe stub extensions of suffi cient length to protrude beyond the sides of the box.

All pipe stub extensions shall be supplied with suitable plugs or caps to prevent contamination of the assembly prior to installation.

Each valve shall be supplied with an identifi cation bracket which shall be bolted directly onto the valve box for the purpose of applying an approved medical gas identifi cation label. A package of labels shall be supplied with each valve box assembly for application by the installer.

Amico products comply with NFPA-99, CSA Z7396.1 and CSA Z305.1.