Amico Satin Finish DISS Wall Outlets
- Flow rate exceeds the requirements of NFPA
- Accepts only DISS gas specific adapters
- 100 % Hydrostatic testing of each outlet and cleaned for medical gas service
- Indexed to eliminate interchangeability of gas services
- Up to 1” [25mm] wall thickness adjustment
- 360° Swivel Inlet Pipe for easy installation
- Universal Rough-In Assembly to accept Quick Disconnects or DISS front adapters (Can be interchanged at any time)
- Outlets are also available for M.R.I. use
|Request a Quote|
The medical gas outlet shall be an Amico Alert-1 series.
- Outlets shall be manufactured with a 6-1/2” [165 mm] length type “K” 1/2” [12.7 mm] outside diameter (3/8” nominal) size copper inlet pipe stub, which is silver brazed to the outlet body. The body shall be of 1-5/16” [33 mm] diameter, one piece brass construction. For positive pressure gas services, the outlet shall be equipped with a primary and secondary check valve and the secondary check valve shall be rated at a maximum of 200 psi [1,379 kPa] in the event the primary check valve is removed for maintenance. Outlet bodies shall be gas specific by indexing each gas service to a gas speci c single pin indexing arrangement on the respective identi cation module.
- A satin finish color coded front plate shall be used for gas identification and aesthetic appeal.
- A one piece flat grey fascia plate shall frame the outlet. With the back rough-in mounted, the outlet shall adjust from 3/8” [10mm] to 1” [25mm] variation in wall thickness.
- The outlets shall be of modular design and include a gas speci c 1.6 mm [16 ga.] steel mounting plate designed to permit on-site ganging of multiple outlets, in any order, on 5” [127 mm] spacing.
- The latch-valve assembly shall be D.I.S.S. (Diameter Index Safety System) and shall only accept corresponding gas specific adapters.
- All M.R.I. outlets are manufactured from nonferrous materials.
- All outlets shall be cleaned and degreased for medical gas service, factory assembled and tested.
- The outlets are UL Listed and ETL Listed.
- Amico products comply with NFPA-99