Allied Connect2 Quick-Connect Medical Gas Outlets

 
Elements:

• Accepts both Chemetron® and Ohmeda® adapters in the same outlet
• Push-button release for Chemetron adapters; Ohmeda adapters are twist-released
• Cleaned for oxygen service
• Safety keyed to help prevent cross-connections
• Conforms to NFPA and CGA
• UL and CSA approved
• Universal Rough-In Assembly to accept Quick Disconnects or DISS Front Adapters (Can be interchanged at any time)
• Outlets are also available for M.R.I. use

Request a Quote

 
Description:
The Allied Connect2® medical gas outlet stations provide convenient access to medical gases in patient care locations. They accept either a Chemetron or Ohmeda adapter in the same outlet.

The outlets are field-gangable in any order desired by the facility. Outlets are spaced 5″ (12.7 cm) center to center. Outlet finish plates and rough-in plates are pin indexed using steel pins for positive cross-connection prevention. Primary valves are separate from the finish plate, allowing easy testing for leaks and cross connection. Primary valves are made of brass and contain a chrome-plated self-sealing poppet. Primary valves are field-adjustable to compensate for variations in plaster thickness of 1/2″ to 3/4″. Outlets may be special ordered with extended valve bodies that allow for an additional 3/8″ or 3/4″ adjustment.

The type K copper inlet tube has a 1/2″ OD connection, and can rotate 360 degrees to accommodate any field piping arrangement. The primary gas check can be serviced without shutting off the gas supply.

Finish plates consist of a stainless steel insert surrounded by a silver metallic-finish ABS high-impact decorative trim. Elements Connect2® Quick-Connect Medical Gas Outlets

The outlet stations are fully compliant with NFPA 99 1999 and CGA G-4.1. The outlet is UL listed. Finish plates consist of a stainless steel insert surrounded by a silver metallic-finish ABS high-impact decorative trim. Gas identification is provided by a polycarbonate plastic insert, color-coded by gas service, per NFPA and CGA.

Release is easily accomplished with one hand using a push button release (or twist release for Ohmeda style adapters). The primary valve poppet provides a dust-proof seal. Vacuum outlets may be used without slide brackets for vacuum collection bottles of up to 1/2-gallon capacity.