Amico Passive Evac WAGD-AGSS DISS Ceiling Outlets

 
Features:

• Flow rate exceeds the requirements of NFPA
• 100% Hydrostatic testing of each outlet and cleaned for medical gas service
• Indexed to eliminate interchangeability of gas services
• Up to 1” [25mm] wall thickness adjustment
• Outlets are also available for M.R.I use

Request a Quote

 
General Specifications:
The medical gas outlet shall be an Amico Alert-1 series.

• The Passive Outlets shall be manufactured with a 7 – 1/4” [184mm] length type “K” 7/8” [22mm] outside diameter, ¾” nominal size copper inlet pipe stub, which is silver brazed to the outlet body. Suction inlets are not supplied with a secondary check valve. A pressure plug is provided for testing purposes, rated at 150psi [1,034kPa]. Outlets bodies shall be gas speci” c by indexing each gas service to a gas speci” c dual pin indexing arrangement on the respective identi” cation module.
• A large color coded front plate shall be used for ease of gas identification and aesthetic appeal.
• A one piece chromed fascia plate shall frame the outlet. With the back rough-in mounted, the outlet shall adjust from 3/8” [10mm] to 1” [25mm] variation in wall thickness.
• The outlet shall be of modular design and include a gas speci” c 16ga [1.6mm] steel mounting plate designed to permit on-site ganging of multiple outlets, in any order, on 5” [127mm] spacing.
• The Passive Front Latch-Valve Assembly is assembled with an aluminum adapter, which accommodates 19/33mm hose.
• All M.R.I. outlets are manufactured from nonferrous materials.
• All outlets shall be cleaned and degreased for medical gas service, factory assembled and tested.
• Amico products comply with NFPA-99.